|
Stage
One
HO's super pulley.
Your stock alternator turns at very slow
rpms due to the pulley size, thus amp output
is low until your engine reaches higher rpms.
Installing an HO super pulley will kick your
alternator output up at lower engine rpms,
thus charging back your battery
quicker.
Suggested
Retail Price $29.95
|
|
Stage
Two
HO's
super pulley and Powrcap 400.
Installing an HO super pulley will kick your alternator output up at lower engine rpms, thus charging back your battery quicker. PowrCap™ is the revolutionary battery that has the quick discharge capabilities of a capacitor ....... but with the storage power of a battery. Powrcap™ will discharge its "capacitor power" and recharge quickly during a heavy base hit, unlike conventional batteries, and keep you powered. Powrcap™ should be wired in parallel to your existing battery, as close to your amplifiers as possible, using heavy gauge cable. Do not ground to the frame.
Suggested
Retail
Price $219.95
|
|
Stage
Three
HO's
super pulley, Powrcap 400 and
Powrbank
2600. Installing an HO super
pulley will kick your alternator output up
at lower engine rpms, thus charging
back your battery
quicker. Powrcap™
will discharge its "capacitor
power" and recharge quickly
during a heavy base hit, unlike conventional
batteries, and keep you powered.
PowrBanktm
is the name of our high capacity stand-alone
batteries. With
extreme high power, these units alone
or in parallel will provide all the storage
power and punch you need.
Suggested
Retail
Price $429.95
|
|
Stage
Four
HO's
super pulley,
Powrcap
4200 and
Powrbank 2600. Installing an HO
super pulley will kick your alternator
output up at lower engine rpms, thus
charging back your battery
quicker. Powrcap™
will discharge its "capacitor
power" and recharge quickly
during a heavy base hit, unlike conventional
batteries, and keep you powered.
PowrBanktm
is the name of our high capacity stand-alone
batteries. With
extreme high power, these units alone
or in parallel will provide all the storage
power and punch you need.
Suggested
Retail
Price $619.95
|
|
Stage
Five
HO's
super pulley,
Powrcap
4200 and
Powrbank 3500. Installing an HO
super pulley will kick your alternator
output up at lower engine rpms, thus
charging back your battery
quicker. Powrcap™
will discharge its "capacitor
power" and recharge quickly
during a heavy base hit, unlike conventional
batteries, and keep you powered.
PowrBanktm
is the name of our high capacity stand-alone
batteries. With
extreme high power, these units alone
or in parallel will provide all the storage
power and punch you need.
Suggested
Retail
Price $689.95
|
|
Mounting
Brackets and Kits*
* Only
available with purchase of our HO
Alternators.
|
|
HEAVY
DUTY CURVED BELT TENSION EXTENSION BRACKET -
A220.
For "truck type" J-180 alternator
installations. Heavier 3/8" thick x
1-1/4" wide curved end bar. Can be
bolted or welded to existing bracket.
Unplated for welding.

|
|
CURVED
BELT TENSION EXTENSION BRACKET A212.
Use with alternator conversions. 3/16"
thick x 1" wide curved end bar. Can be
bolted or welded to existing bracket.
Unplated for welding.

|
|
UNIVERSAL
BELT TENSION EXTENSION BRACKET - A210.
Use with alternator conversions. Design
allows angles up to 45 degrees.

|
|
DELCO
TO DELCO ALTERNATOR CONVERSION BRACKET -
A290.
Install DELCO (2"
mount) on vehicles with DELCO 27SI,
TYPE 100 alternators (dual
ear mounting).
Complete with hardware.

|
|
DELCO TO CHRYSLER
ALTERNATOR CONVERSION BRACKET - A270.
Install DELCO
alternator (2" mounting) on vehicles with CHRYSLER
alternators.
Complete with hardware.

|
|
BRACKET
- A285
Install
DELCO or FORD alternators on
vehicles with "DUAL FOOT" alternators. Can
be used on ARROW, COLT, COURIER,
NISSAN (DATSUN), LUV, MAZDA,
SUBARU, TOYOTA and industrial
applications. Complete with hardware.

*A210
belt tension extension may also be needed.
|
|
UNIVERSAL WELDING BRACKET
FOR DELCO ALTERNATORS - A300.
Install DELCO
alternators (2" mount) with bracket that can be WELDED
to customer supplied engine bracket. Unplated for easy welding.
Complete with hardware.

|
|
DELCO TO FORD SPACER
- A2009.
Install DELCO (2" mount) alternator on FORD
vehicles (3" mount). Note mounting hole in alternator must be enlarged to accept FORD
7/16" bolt.

|
|
UNIVERSAL
ALTERNATOR BRACKET -
A200.
Install DELCO, FORD
and CHRYSLER alternators in
place of units that have 2 mounting ears.
Ideal for older vehicles. Bolts to existing
2 ear mounting bracket.
Complete with hardware.

|